How To Use Tissue Paper To Cover The Balsa Model

Balsa wood is a lightweight wood used by many modelers for its high strength-to-weight ration and bkqsfahq the ease with which it is worked. Balsa is used in many common modeling applications from bridge and tower building for engineering contests to remote-controlled model aircraft bodies. While balsa is well suited for building frames for models the frames need to be covered in order to complete the look of the model. A widely used covering technique involves placing a skin on the models made of tissue paper. Using tissue paper retains the lightness of the model while creating a model cover that can be easily painted, completing the look of your model.
Instructions
Remove any rough spots on the surface of the model to be covered with the tissue paper using the sandpaper.
Lay a sheet of tissue paper onto a flat surface large enough to cover a side of the model. Place the model on the center of the paper and trace a line one-quarter inch around the model's edge. Remove the model and then cut along the line traced into the tissue. This tissue will serve as the covering skin for that portion of your model.
Use a paintbrush to brush the model with the adhesive where the tissue will be placed. Apply the adhesive lightly, as too much will soak the wood, causing warping. Brush all areas where the adhesive will be placed, not just that of the cut tissue. Wait 2 hours for the adhesive to dry on the balsa surface.
Spray the tissue with a light mist of water. The tissue should be slightly damp to the touch, but not wet. Place the damp tissue onto the model, with the extra tissue falling over the edges. Using the paintbrush, brush a light layer of adhesive over the tissue where it meets the wood surface beneath. Fold the overhanging tissue along the sides of the model and brush the overhanging tissue with the adhesive as well. Because the tissue is damp, the adhesive will combine with the water and bind to the already placed layer of adhesive dried onto the model. Wait another 2 hours for the tissue and adhesive to dry and then repeat the process to cover the remainder of the model. The drying tissue shrinks onto the model, creating a smooth surface suitable for painting.
Tips & Warnings
The clear dope adhesive emits fumes that can be dangerous when breathed for long lengths of time. The covering process should be completed only in a ventilated area.If you want to know more about balsa information , you can visit our website: http://www.balsafactory.com/.

Now You can Glue the Balsa Wood Project With Tissue Paper

As we all know, when we finish completing a balsa project, we may need to do some follow-up processes to make our project more stable or more beautiful. There are several methods can be used to achieve our goal. If we have plenty of time and money, we can use elaborate chemical-based skins to strengthen the model. If not, we can simply use tissue paper or white school glue instead to meet our needs. Generally, the tissue paper is the most economical and most versatile material to suit our requirements. Here we are talking about how to use tissue paper to cover our balsa project. Before we start the job, we have to prepare some necessary tools: tissue paper, glue, hobby knife and so on. All these necessary tools can easily be purchased in a store.
Step 1
Make a decision of the color of the tissue paper that you will use. If you are working on a project that you just desired, you need to decide the color on your design. But if you are dealing with a kit that has been already completed, you can make the color similar to the the pre-determined color.
Step 2
Cut the tissue paper into the pieces which can suit the shape of the pieces to be covered. In order to waste as little as possible, you can cut the tissue paper into the smallest possible size before gluing it to the frame. At the same time, you will have less work to do in the end if you cut down the waste of tissue paper at start.
Step 3
Keep the tissue paper wet until we need to use it. We can place it between two wet towels to keep it wet or use a spray bottle to spray it. Glue the wet tissue paper to the balsa project. The project will be covered with the tissue paper. Glue over the whole frame. Place the tissue paper over the frame which has been glued over. Connect the paper and the frame as tightly as possible. We should discard the paper and start over if there are any broken parts of the paper.
Step 4
In order to make your balsa wood model more stable and charming, you will need to cut down the tissue paper which is excess. Use the hobby knife to cut the paper as carefully as you can, make sure that any excess parts has been cut down and you would not damage the suitable parts.