Maybe you are familiar with balsa wood if you are interested in
making models or other artifact. But do you know how to choose the right grain
of balsa wood to
complete your project? If you are using the same type of balsa during the
producing process, I'm afraid that the flexibility or stability of the model is
not qualified.
A-grain is cut at tangents to the growth rings and that's why it is know as a
tangent cut as well. This type of balsa wood is flexible and easy to deal with.
However, its strength limits its use. It is not suitable to bear much pressure
but it is able to be used make the items which need more flexibility, such as
spars, fuselages and forming tubes.
On the contrary, C-grain is cut sliced off at a perpendicular angle to the
growth rings. This type of balsa wood is strong and stiff enough to bear certain
pressure. But the lack of flexibility makes it easy to break while being bent or
carving. It can be used to make wing trailing edges, wing ribs, fuselage sides
and fuselage formers.
B-grain is cut at a angle between A-grain and C-grain. This type of balsa
wood is not suggest to be used if the project requires essential qualities. It
can attain the features of A-grain while the other end attains the
characteristics of C-grain, and that's why it is difficult to deal with. If you
want to know more information about the grades of balsa wood, welcome to visit
our website: www.balsafactory.com
No comments:
Post a Comment